|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
2SD2695 TOSHIBA Transistor Silicon NPN Epitaxial Type (Darlington Power Transistor) 2SD2695 Micro Motor Drive, Hammer Drive Applications Switching Applications Power Amplifier Applications Unit: mm * * * High DC current gain: hFE = 2000 (min) (VCE = 2 V, IC = 1 A) Low saturation voltage: VCE (sat) = 1.5 V (max) (IC = 1 A, IB = 1 mA) Zener diode included between collector and base Absolute Maximum Ratings (Ta = 25C) Characteristics Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Base current Collector power dissipation Junction temperature Storage temperature range Symbol VCBO VCEO VEBO IC IB PC Tj Tstg Rating 50 60 10 8 2 0.5 0.9 150 -55 to 150 Unit V V V A A W C C JEDEC JEITA TOSHIBA TO-92MOD 2-5J1A Weight: 0.36 g (typ.) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Equivalent Circuit COLLECTOR BASE 4 k 800 EMITTER 1 2006-11-21 2SD2695 Electrical Characteristics (Ta = 25C) Characteristics Collector cut-off current Emitter cut-off current Collector-emitter breakdown voltage DC current gain Collector-emitter saturation voltage Base-emitter saturation voltage Transition frequency Collector output capacitance Unclamped inductive load energy Turn-on time Symbol ICBO IEBO V (BR) CEO hFE VCE (sat) VBE (sat) fT Cob ES/B ton IB1 Test Condition VCB = 45 V, IE = 0 VEB = 8 V, IC = 0 IC = 10 mA, IB = 0 VCE = 2 V, IC = 1 A (pulsed) IC = 1 A, IB = 1 mA (pulsed) IC = 1 A, IB = 1 mA (pulsed) VCE = 2 V, IC = 0.5 A (pulsed) VCB = 10 V, IE = 0, f = 1 MHz L = 10 mH, IC = 2.0 A, IB = 50 mA Output 30 Min 50 2000 20 Typ. 60 100 20 0.4 Max 10 4 70 1.5 2.0 V V MHz pF mJ Unit A mA V 20 s Input IB2 IB1 IB2 Switching time Storage time tstg 4.0 s VCC = 30 V Fall time tf IB1 = -IB2 = 1 mA, duty cycle 1% 0.6 Marking D2695 Part No. (or abbreviation code) Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2006-11-21 2SD2695 IC - VCE 2.0 10000 500 250 Common emitter Ta = 25C Common emitter VCE = 2 V hFE - IC (A) 1.6 DC current gain hFE 200 1.2 Collector current IC 1000 Ta = 100C -55 180 0.8 IB = 170 A 100 25 0.4 PC = 0.9 W 0 0 2 4 6 8 10 10 0.01 0.1 1 10 Collector-emitter voltage VCE (V) Collector current IC (A) VCE (sat) - IC 10 2.0 Common emitter IC/IB = 1000 IC - VBE Common emitter VCE = 2 V 1.6 Collector-emitter saturation voltage VCE (sat) (V) Collector current IC (A) Ta = -55C 1 25 100 1.2 Ta = 100C -55 0.8 25 0.4 0.1 0.1 1 10 0 0 0.8 1.6 2.4 3.2 4 Collector current IC (A) Base-emitter voltage VBE (V) VBE (sat) - IC 10 2.0 Common emitter IC/IB = 1000 PC - Ta (W) Collector power dissipation PC 10 1.5 1.0 Base-emitter saturation voltage VBE (sat) (V) Ta = -55C 25 0.5 100 1 0.1 1 0 0 40 80 120 160 200 Collector current IC (A) Ambient temperature Ta (C) 3 2006-11-21 2SD2695 Safe Operating Area 5 3 IC max (pulsed)* IC max (continuous) 10 ms* 100 s* (A) 1 0.5 0.3 DC operation Ta = 25C 1 ms* Collector current IC 0.1 Ta = 25C 0.03 Curves must be derated linearly with increase in temperature. 0.01 0.1 0.3 1 3 VCEO max 10 30 50 100 0.05 *: Single nonrepetitive pulse Collector-emitter voltage VCE (V) 4 2006-11-21 2SD2695 RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 5 2006-11-21 |
Price & Availability of 2SD2695 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |